With cash being tight presently, maybe the solution to giving your car a brand new look would be to indulge in a couple of car spray painting. If the mechanics of it are in good shape, but the body is not so hot, then painting it may be the ideal solution.

Its a outstanding money saver, but even more so if you do it yourself as opposed to having it professionally done up. You can do it if you study the fundamentals and follow the instructions for car spray painting. It is essential though if you decide you’re going to take on this project that you are prepared to see it through till the end.

The supplies you need are :

-coverings to secure the unpainted areas and masking tape to hold these at the correct place
-a good car wash soap and brush as well as a wax/grease remover.
-a few grits of sand-paper
-primers and paint that’s urethane base for the car spray painting
-paint sprayer
-safety equipment such as masks, goggles and protective clothing
-knife and putty for fill ins.

Now you can spray paint your car in 2 hours easily with Spray Paint Secrets. These cars spray paint techniques are previously only revealed in expensive workshop course. Visit SprayPaintSecrets now…

Step 1 :
You must be certain that you wash the car thoroughly to remove all grime and debris. If you don’t then these things would be set in with your paint, leaving a very daunting look to the completed job. Follow up with a wax/grease remover so the paint you utilise for the car spray painting will adhere properly.

Step 2 :
Take out whatsoever rough spots by sanding. Once this has been done be sure to rinse off any of the loose sandings. This’s where you will want to utilise the putty to fill in any minor pit marks, that’re have been caused from stones for instance.

Step 3 :
Dont get in too much of a rush to start your car spray painting. The car must be totally dry so its best to leave it to do so for few hours. You could go ahead and cover any of the areas that your don’t want to get paint on.

Step 4:
Presently you’re ready to set out with the primer. Dont skip this step, as it’ll give a much better look to the completed project. It helps the paint to adhere properly and allows for a more even finish. Next, once the primer is dry you’ll need to lightly sand it down.

Step 5:
You are eventually at the step you’ve been waiting for. Its time to apply the color for your car spray painting. Whether you’ve chosen to use aerosol paints or a spray gun, the premise stays the same. Only apply thin coats. A few will likely be essential. Many light coats are much better than 1 thick coat. You will be able to tell just by looking at the car how many more coats of paint it would need. Various may just require 2 where as a few others might need three or 4.

Step 6:
Lastly, down to the last step and thats applying the clear coat. This is done precisely the same as the colored coats.

Now you could have a look at your personalised car spraying.

Discover the secrets of custom spray painting and car bodywork repair with Mario from SprayPaintSecrets. Download your free car bodywork paint videos and paint repair techniques from the site now.

auto, automotive, cars